02 / Capability
Security Infrastructure & Automation
Hardware only earns its cost when someone is watching it, it is maintained, and it is wired into a response. We design for all three.
Most facilities we are asked to look at do not lack equipment. They have cameras, they have a gate, they have a barrier, they have an access register. What they lack is a system: the parts were bought at different times, by different people, for different reasons, and nothing ties them together.
The result is a security posture that looks substantial on a walk-round and performs poorly under pressure — footage that cannot be retrieved, a gate register nobody audits, a perimeter alarm that has been ignored so often it is now muted.
What this covers
- Site security survey and layered perimeter design
- Access control for personnel, contractors and vehicles
- CCTV design, siting, coverage modelling and retention
- Perimeter intrusion detection and alarm management
- Smart sensing and automated detection tied to defined alarm responses
- Lighting, signage and physical deterrence as part of the design
- Integration of new equipment with systems already on site
- Commissioning, operator training and maintenance planning
Method
How we approach it
Four principles that shape every deployment of this capability, whatever the site.
Design the layers before choosing the products
The question is not which camera. It is what has to be detected, at what range, in what light, and what happens in the ninety seconds after it is detected. Specify that first and the equipment list follows from it. Do it the other way round and you buy hardware that solves nothing.
Assume the environment is hostile to equipment
Heat, humidity, salt air, dust, unstable mains power and lightning are all normal operating conditions here, and they destroy systems specified for gentler places. Environmental rating, power resilience and surge protection are design inputs, not accessories.
Automate detection, never the decision
Analytics and sensing should reduce how much a human has to watch, and raise the things that matter. They should not be trusted to decide what is happening. Every automated alarm resolves to a person with a procedure.
Plan maintenance into the build
An unmaintained system degrades to worse than nothing, because it produces confidence without coverage. Whoever operates the site needs a maintenance regime, spares, and a way of knowing that a device has gone dark.
Scoping
What we will ask you
These are the questions that shape a serious proposal. If you already know the answers, the first conversation moves a lot faster.
- What is already installed, how old is it, and how much of it currently works?
- How many people and vehicles enter on a normal day, and how are they verified?
- Is footage ever actually retrieved, and how long is it retained?
- What is your mains power situation, and what happens to security on an outage?
- Who responds to an alarm at 3am, and how long do they take to arrive?
- Are there hazardous-area classifications that constrain equipment selection?
At a glance
| Typical assets | Flow stations, tank farms, terminals, yards, offices, warehouses and gatehouses |
|---|---|
| Design inputs | Threat assessment, site layout, lighting conditions, power availability, hazardous-area zoning |
| Integration | Existing CCTV, access hardware, alarms and control room equipment where serviceable |
| Handover | Commissioning records, operator training, maintenance schedule and spares list |
Common questions
Before you ask us
Will you specify equipment you also supply?
We will tell you plainly what a design requires and why. Where you would rather procure independently or use an existing framework supplier, the specification is yours to take to them.
Can you work with the systems we already own?
Usually, and it is normally the better answer. Ripping out serviceable equipment to standardise on one brand is an expensive way to solve a problem that is often about integration and maintenance instead.
Do you handle hazardous-area installations?
Zoning constrains what can be installed and how. We treat classification as a design input from the survey onward and will tell you where it rules an option out.